HPE DL580 Gen10 5120 2P 32GB 8SFF CN Sever comes standard with two Intel Xeon-Gold 5120 (2.2GHz/14-core/105W) processors supporting up to four processors; comes standard with 32 GB DDR4-2666 MT/s (2 ×16 GB) memory, up to 48 memory slots; built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery; standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk; standard with seven PCI-E 3.0 slots; standard 4-port Gigabit 331FLR Ethernet card; standard with two 1600W hot-swap platinum power supply, optional support for redundancy (3+1); comes standard with 12 hot-swappable redundant fans (N+1); standard without optical drive; standard HPE iLO5; 4U rack type with easy mounting rails and cable management arm; 3 years 5* 9, NBD.
Table 1 shows the quick spec.
| 
			 Model  | 
			
			 869852-AA1  | 
		
| 
			 Description  | 
			
			 HPE ProLiant DL580 Gen10 5120 2.2GHz 14C 105W 2P 32G-2R P408i-p 8SFF 2x1600W Base CN Server  | 
		
| 
			 Processor  | 
			
			 Two Intel Xeon-Gold 5120 (2.2GHz/14-core/105W) processors, supporting up to four processors  | 
		
| 
			 Memory  | 
			
			 Comes standard with 32 GB DDR4-2666 MT/s (2 ×16 GB) memory, up to 48 memory slots  | 
		
| 
			 Array Controller  | 
			
			 Built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery  | 
		
| 
			 Hard Disk  | 
			
			 Standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk  | 
		
| 
			 PCI-E  | 
			
			 Seven PCI-E 3.0 slots  | 
		
| 
			 Power Supply  | 
			
			 Two 1600W hot-swap platinum power supply, optional support for redundancy (3+1)  | 
		
| 
			 Rack Type  | 
			
			 4U  | 
		
| 
			 Dimensions (H x W x D) (with bezel)  | 
			
			 17.48cm x 44.55cm x 75.18cm (6.88 x 17.54 x 29.60 in)  | 
		
| 
			 Weight (approximate)  | 
			
			 51.71 kg (114 lb) Maximum: (all hard drives, power supplies, DIMMs and processors installed) 28.12 kg (62 lb) Minimum: (one processor, one standard heatsink, one air baffle, one hard drive, two power supply, one DIMM, one NIC one rail kit with CMA and one primary riser installed)  | 
		
Figure 1 shows the front view of DL580 Gen10 servers.

Note:
| 
			 ①  | 
			
			 Quick removal access panel  | 
		
| 
			 ②  | 
			
			 Box 1 (8 SFF, 6 SFF+2 NVMe or 8 NVMe (supports only 4 NVMe drives) SSD optional)  | 
		
| 
			 ③  | 
			
			 Box 2 (8 SFF, 6 SFF+2 NVMe or 8 NVMe PCIe SSD optional)  | 
		
| 
			 ④  | 
			
			 Box 3 (8 SFF, 6 SFF+2 NVMe or 8 NVMe PCIe SSD optional)  | 
		
| 
			 ⑤  | 
			
			 Front USB 3.0 port  | 
		
| 
			 ⑥  | 
			
			 Power On/Standby button and system power LED button  | 
		
| 
			 ⑦  | 
			
			 Health LED  | 
		
| 
			 ⑧  | 
			
			 NIC status  | 
		
| 
			 ⑨  | 
			
			 UID button  | 
		
| 
			 ⑩  | 
			
			 iLO Front Service Port  | 
		
| 
			 ⑪  | 
			
			 Front USB 3.0 port  | 
		
| 
			 ⑫  | 
			
			 Serial label pull tag  | 
		
| 
			 ⑬  | 
			
			 Box 6 (8 SFF)  | 
		
| 
			 ⑭  | 
			
			 Box 5 (8 SFF)  | 
		
| 
			 ⑮  | 
			
			 Box 4 (8 SFF or Universal Media bay)  | 
		
| 
			 ⑯  | 
			
			 Optional USB 2.0 (via Universal Media Bay)  | 
		
| 
			 ⑰  | 
			
			 Optional 2 SFF HDD, requires optional Universal Media bay  | 
		
| 
			 ⑱  | 
			
			 Optional front display port (via Universal Media Bay)  | 
		
| 
			 ⑲  | 
			
			 Optional USB 2.0 (via Universal Media Bay)  | 
		
Figure 2 shows the back view of DL580 Gen10 servers.

Note:
| 
			 ①  | 
			
			 PCIe Slots (Slots 1-7 top to bottom), requires primary riser  | 
		
| 
			 ②  | 
			
			 PCIe Slots (Slots 8-14 top to bottom), requires secondary riser (includes tertiary riser)  | 
		
| 
			 ③  | 
			
			 PCIe Slots (Slots 15-16 top to bottom), requires tertiary riser (included with secondary riser)  | 
		
| 
			 ④  | 
			
			 Power supply Power LED (max. 4)  | 
		
| 
			 ⑤  | 
			
			 Power supply Power connection (max. 4)  | 
		
| 
			 ⑥  | 
			
			 HPE Flexible Slot Power Supply, 800W PS shown (max. 4)  | 
		
| 
			 ⑦  | 
			
			 Serial connector  | 
		
| 
			 ⑧  | 
			
			 Dedicated iLO connector  | 
		
| 
			 ⑨  | 
			
			 VGA (video) connector  | 
		
| 
			 ⑩  | 
			
			 USB connectors 2.0 (2)  | 
		
| 
			 ⑪  | 
			
			 USB connectors 3.0 (2)  | 
		
| 
			 ⑫  | 
			
			 Unit ID LED  | 
		
| 
			 ⑬  | 
			
			 FlexibleLOM ports (Port 1 on right side) 
  | 
		
Table 2 shows the recommended hard drives.
| 
			 Product number  | 
			
			 Description  | 
		
| 
			 872475-B21  | 
			
			 HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD  | 
		
| 
			 872477-B21  | 
			
			 HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD  | 
		
| 
			 870753-B21  | 
			
			 HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD  | 
		
| 
			 872479-B21  | 
			
			 HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD  | 
		
Table 3 shows the comparison.
| 
			 Model  | 
			
			 869851-AA1  | 
			
			 869852-AA1  | 
		
| 
			 Description  | 
			
			 HPE ProLiant DL580 Gen10 6130 2.1GHz 16C 120W 2P 64G-2R P408i-p 8SFF 2x1600W Performance CN Server  | 
			
			 HPE ProLiant DL580 Gen10 5120 2.2GHz 14C 105W 2P 32G-2R P408i-p 8SFF 2x1600W Base CN Server  | 
		
| 
			 Processor  | 
			
			 Two Intel Xeon-Gold 6130 (2.1GHz/16-core/120W) processors, supporting up to four processors  | 
			
			 Two Intel Xeon-Gold 5120 (2.2GHz/14-core/105W) processors, supporting up to four processors  | 
		
| 
			 Memory  | 
			
			 Comes standard with 64 GB DDR4-2666 MT/s (2 ×32 GB) memory, up to 48 memory slots  | 
			
			 Comes standard with 32 GB DDR4-2666 MT/s (2 ×16 GB) memory, up to 48 memory slots  | 
		
| 
			 Array Controller  | 
			
			 Built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery  | 
			
			 Built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery  | 
		
| 
			 Hard Disk  | 
			
			 Standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk  | 
			
			 Standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk  | 
		
			869852-AA1 Specification | 
		|
| 
			 Description  | 
			
			 HPE ProLiant DL580 Gen10 5120 2.2GHz 14C 105W 2P 32G-2R P408i-p 8SFF 2x1600W Base CN Server  | 
		
| 
			 Processor  | 
			
			 Two Intel Xeon-Gold 5120 (2.2GHz/14-core/105W) processors, supporting up to four processors  | 
		
| 
			 Memory  | 
			
			 Comes standard with 32 GB DDR4-2666 MT/s (2 ×16 GB) memory, up to 48 memory slots  | 
		
| 
			 Array Controller  | 
			
			 Built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery  | 
		
| 
			 Hard Disk  | 
			
			 Standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk  | 
		
| 
			 PCI-E  | 
			
			 Seven PCI-E 3.0 slots  | 
		
| 
			 Power Supply  | 
			
			 Two 1600W hot-swap platinum power supply, optional support for redundancy (3+1)  | 
		
| 
			 Rack Type  | 
			
			 4U  | 
		
| 
			 Dimensions (H x W x D) (with bezel)  | 
			
			 17.48cm x 44.55cm x 75.18cm (6.88 x 17.54 x 29.60 in)  | 
		
| 
			 Weight (approximate)  | 
			
			 51.71 kg (114 lb) Maximum: (all hard drives, power supplies, DIMMs and processors installed) 28.12 kg (62 lb) Minimum: (one processor, one standard heatsink, one air baffle, one hard drive, two power supply, one DIMM, one NIC one rail kit with CMA and one primary riser installed)  |