HPE DL388 Gen10 Xeon-S 4108 SP1476CN Sever comes standard with an Intel Xeon-Silver 4108 (1.8GHz/8-core/85W) processor supporting up to 2 processors; comes standard with 16GB DDR4-2666 MT/s (1 ×16 GB) memory, comes standard with 24 memory slots; built-in HPE Smart Array P408i-a/2GB SR Gen10 12Gb SAS array controller with intelligent storage battery; standard 8 SFF hot-plug hard disk slots, up to Expands to 24+6 SFF hot-swappable hard drives, comes standard with no hard drives; comes standard with 3 PCI-E 3.0 slots; comes standard with an embedded 4-port Gigabit Ethernet card, comes standard with 1 FlexibleLOM slot; standard 1 500W hot-swappable platinum power supply with optional redundancy; 4 hot-swappable fans, up to 6 hot-swappable fans (N+1); standard without optical drive; standard HPE iLO 5; 2U rackmount , Convenient mounting rails, no cable management rack; 3 years 5*9, NBD.
Figure 1 shows the SFF front panel components.
Note:
| 
			 ①  | 
			
			 Box 1 (optional drives or universal media bay, see figure 2)  | 
			
			 ③  | 
			
			 Box 3 Drives 1-8  | 
			
			 ⑤  | 
			
			 USB 3.0 port  | 
		
| 
			 ②  | 
			
			 Box 2 (optional drives)  | 
			
			 ④  | 
			
			 Serial label pull tab or optional Systems Insight Display  | 
			
			 ⑥  | 
			
			 iLO service port  | 
		
Figure 2 shows the Universal media bay components. It needs to be purchased separately.
Note:
| 
			 ①  | 
			
			 ②  | 
			
			 ③  | 
			
			 ④  | 
			
			 ⑤  | 
		
| 
			 USB 2.0 port  | 
			
			 Video display port  | 
			
			 Optical disk drive (optional)  | 
			
			 USB 2.0 port  | 
			
			 Drives (optional)  | 
		
Figure 3 shows the rear panel components. These installed drives need to be purchased separately.
Note:
| 
			 ①  | 
			
			 Primary riser slots 1-3 (Optional drive cage)  | 
			
			 ⑤  | 
			
			 Power supply 2  | 
			
			 ⑨  | 
			
			 iLO management port  | 
		
| 
			 ②  | 
			
			 Optional riser slots 4-6 (Optional drive cage)  | 
			
			 ⑥  | 
			
			 Video port  | 
			
			 ⑩  | 
			
			 USB 3.0 ports  | 
		
| 
			 ③  | 
			
			 Optional riser slots 7-8 (Optional drive cage)  | 
			
			 ⑦  | 
			
			 Serial port (optional)*  | 
			
			 ⑪  | 
			
			 FlexibleLOM slot  | 
		
| 
			 ④  | 
			
			 Power supply 1  | 
			
			 ⑧  | 
			
			 1Gb RJ-45 ports 1–4  | 
			
			 
  | 
		|
*When a tertiary riser cage is installed as shown, the serial port can be installed in riser slot 6.
Table 1 shows the supported SFF hard drives.
| 
			 Product number  | 
			
			 Description  | 
		
| 
			 872475-B21  | 
			
			 HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD  | 
		
| 
			 872477-B21  | 
			
			 HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD  | 
		
| 
			 870753-B21  | 
			
			 HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD  | 
		
| 
			 872479-B21  | 
			
			 HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD  | 
		
| 
			 868818-B21  | 
			
			 HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD  | 
		
| 
			 875503-B21  | 
			
			 HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD  |