Table 1 shows the Quick Specs.
|
Product Code |
C6800-32P10G= |
|
Ports per module |
·32 ports—Thirty-two 1G ports, or thirty-two 10G ports, or eight 40G ports ·Ports are numbered left to right. ·The top row has odd numbered ports 1 to 31. ·The bottom row has even numbered ports 2 to 32. ·4 port groups. Port ranges per port group: ·1, 3, 5, 7, 9,11, 13, 15 ·2, 4, 6, 8, 10, 12, 14, 16 ·17, 19, 21, 23, 25, 27, 29, 31 ·18, 20, 22, 24, 26, 28, 30, 32 |
|
Backplane connection |
160-Gbps backplane bandwidth in 6807XL; 80 Gbps backplane bandwidth in 6500-E chassis |
|
Chassis/slot support |
Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL. Can occupy any slot in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E |
|
Distributed forwarding and performance |
Comes equipped with factory-installed dual (2) DFC4-E or DFC4-EXL daughter cards |
|
Maximum frame size |
Up to 9216 bytes per frame |
|
Module oversubscription rate |
·2:1 oversubscription in a Cisco Catalyst 6807-XL chassis. (When all thirty-two 10G ports are used.) ·4:1 oversubscription in a Cisco Catalyst 6500 E-series chassis.(When all thirty-two 10G ports are used.) |
|
Supervisor engine support |
Supervisor Engine 2T-10GE Supervisor Engine 6T |
|
Software support |
With Supervisor Engine 2T-10GE —Cisco IOS Release 15.2(1)SY or later With Supervisor Engine 6T – Cisco IOS Release 15.3(1)SY or later |
|
Fabric channel speed |
In a Cisco Catalyst 6807-XL chassis—160 GB per second In a Cisco Catalyst 6500-E series chassis—80 GB per second |
|
TDR support |
Supported with GLC-T (1G Copper SFP) transceivers |
|
Digital Optical Monitoring (DOM) support |
The DOM-supported 1G transceivers and 10G Fiber SFP/SFP+ transceivers |
|
Port connector type |
LC (optical) or RJ-45 (copper) depending on the SFP transceiver installed. Depending on the distance between the end ports, different QSFP+ transceivers can be used |
|
Dimensions (H x W x D) |
1.73 x 15.4 x 16.4 inches (4.39 x 39.11 x 41.65 cm) |
|
Weight |
14.33 lb (6.5 kg) |
Note:
|
① |
Status and ID LEDs |
|
② |
40G port IDs |
|
③ |
10G ports (A total of eight port groups) |
|
④ |
RFID |
·The sticker on the module faceplate identifies it as either a C6800-32P10G or a C6800-32P10G-XL depending on whether a WS-F6K-DFC4-E or WS-F6K-DFC4-EXL daughter card is installed on the module.
Table 2 shows the recommended elements for the C6800-32P10G=.
|
Category |
Model |
Description |
|
10G SFP Options
|
SFP-10G-LRM |
10GBASE-LRM SFP Module |
|
SFP-10G-ZR |
10GBase-ZR Optical Transceiver,SFP+,10G,Single-mode Module(1550nm,80km,LC) |
|
|
GLC Options
|
GLC-BX-U |
1000BASE-BX SFP, 1310NM |
|
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
|
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Table 3 shows the comparison of C6800-32P10G= , C6800-16P10G-XL and C6800-8P10G=.
|
Product Code |
C6800-32P10G= |
C6800-16P10G-XL |
C6800-8P10G= |
|
10GE ports |
32 ports 1GE or 10GE |
16 ports 1GE or 10GE |
8 ports 1GE or 10GE |
|
Port groups |
4 port groups |
2 port groups (N/A) |
2 port groups (N/A) |
|
Performance Mode |
Yes per port-group
|
Yes per port-group
|
N/A |
|
Switch fabric connection |
160 Gbps in 6807-XL chassis 80 Gbps in 6500-E chassis
|
80 Gbps in 6807-XL and 6500-E chassis |
80 Gbps in 6807-XL and 6500-E chassis |
C6800-32P10G= Specification |
|
|
Physical Specifications |
|
|
Dimensions (H x W x D) |
1.73 x 15.4 x 16.4 inches (4.39 x 39.11 x 41.65 cm) |
|
Weight |
14.33 lb (6.5 kg) |
|
Environmental Specifications |
|
|
Operating temperature |
Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 130°F (0° to 55°C) |
|
Humidity (RH) ambient (noncondensing) |
10 to 90 percent |
|
Operating altitude |
Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m) |
