Table 1 shows the quick spec.
Part Number |
ASR1006-X |
Route Processor |
2 route-processor slots |
Cisco ASR 1000 Series ESP |
2 ESP slots |
Ethernet Port Adapters |
4 EPA slots |
Shared Port Adapters |
8 SPA slots |
Number of SIPs or Ethernet line cards supported |
2 |
Default Memory |
8-GB DRAM RP2 8-GB DRAM RP3 |
Dimension |
Height: 10.47 in. (265.9 mm) Width: 17.2 in. (437.4 mm) Depth: 18.15 in. (461.0 mm) |
Weight |
36.5 lb empty |
Figure 1 shows the appearance of ASR1006-X. It’s only a chassis. Those modules need to be purchased separately.
Figure 2 shows the back view of ASR1006-X.
The Cisco ASR 1006-X Router can support up to six AC or six DC power supplies. The chassis does not support mixed AC and DC configuration.
Dimension
Height: 10.47 in. (265.9 mm)
Width: 17.2 in. (437.4 mm)
Depth: 18.15 in. (461.0 mm)
Default memory
8-GB DRAM RP2
8-GB DRAM RP3
Number of SIPs or Ethernet line cards supported
2
Shared port adapters
8 SPA slots
Ethernet port adapters
4 EPA slots
Cisco ASR 1000 Series ESP
2 ESP slots
Route processor
2 route-processor slots
Redundancy
Hardware: Yes
Built-in Gigabit Ethernet ports
0
Built-in 10 Gigabit Ethernet port
No
Network interface module
No
ESP support
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) and
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100)
ESP bandwidth
40 to 100 Gbps
ESP memory
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40):
8-GB DRAM
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM
SIPs and Ethernet line cards
Supports Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40), Cisco ASR1000 Series MIP 100-Gbps Carrier Card (ASR1000-MIP100), and ASR 1000 Fixed Ethernet Line Card; two 10 GE + twenty 1 GE line cards (ASR1000-2T+20X1GE); and six 10 GE line cards (ASR1000-6TGE)
Embedded hardware-based encryption
Yes: On Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11-Gbps crypto support throughput and Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput
Minimum Cisco IOS XE Software release
Cisco IOS XE Software Release 3.16.0
Rack-mounting
Yes: 19-inch
Wall-mounting
No
External USB flash memory
1-GB USB flash-memory support
Redundant power supply
Yes: Dual power supplies by default, expandable up to a total of six, depending on configuration and redundancy preferences; option of either 1100W AC or 950W DC
Note: A mix of AC and DC power supplies is not supported.
Power input
Worldwide ranging AC input range (85 to 264 VAC)
Worldwide ranging DC
(-40 to -72; -48V nominal)
Power consumption
● Maximum (DC): 4600W
● Maximum (AC): 4500W
Airflow
Front-to-back
Operating temperature (nominal)
Same as for Cisco ASR 1001-X
Operating temperature (short-term)
Same as for Cisco ASR 1001-X
Operating humidity (nominal) (relative humidity)
Same as for Cisco ASR 1001-X
Operating humidity (short-term)
Same as for Cisco ASR 1001-X
Storage temperature
Same as for Cisco ASR 1001-X
Storage humidity (relative humidity)
Same as for Cisco ASR 1001-X
Operating altitude
Same as for Cisco ASR 1001-X
Network Equipment Building Standards (NEBS)
GR-1089 and GR-63
EMC standards
Same as for Cisco ASR 1001-X
Safety Standard
UL60950-1
CSA C22.2 No. 60950-1-03
EN 60950-1
IEC 60950-1
AS/NZS 60950.1