The Cisco Nexus 93180YC-FX Switch is a 1RU switch with latency of less than 1 microsecond that supports 3.6 Tbps of bandwidth and 1.2 bpps. The 48 downlink ports on the 93180YC-FX are capable of supporting 1-, 10-, or 25-Gbps Ethernet or as 16-, 32-Gbps Fibre Channel ports, creating a point of convergence for primary storage, compute servers, and back-end storage resources at the top of rack.
Table 1 shows the Specs.
|
SKU |
N9K-C93180YC-FX |
|
Ports |
48 x 1/10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports |
|
Downlink supported speeds |
1/10/25-Gbps Ethernet 16/32-Gbps Fibre Channel |
|
CPU |
6 cores |
|
System memory |
Up to 32 GB |
|
SSD drive |
128 GB |
|
System buffer |
40 MB |
|
Typical power (AC/DC) |
260W |
|
USB ports |
1 |
|
RS-232 serial ports |
1 |
Cisco N9K-C93180YC-FX provides the following features and benefits:
①Architectural Flexibility
②Architectural Flexibility
③High Scalability, Flexibility, and Security
④Intelligent Buffer Management
⑤RDME over Converged Ethernet – RoCE Support
⑥LAN and SAN Convergence
⑦Hardware and Software High Availability
⑧Purpose-Built Cisco NX-OS Software Operating System with Comprehensive, Proven Innovations
⑨Cisco Tetration Analytics Platform Support
⑩Cisco Network Assurance Engine (NAE)
Figure 1 shows the front panel of Cisco N9K-C93180YC-FX.
Note:
|
① |
Beacon [BCN], Status [STS], and Environment [ENV] LEDs |
|
② |
48 10/1-Gigabit RJ45 ports |
|
③ |
6 40/100-Gigabit QSFP28 ports |
Figure 2 shows the rear panel of Cisco N9K-C93180YC-FX.
Note:
|
① |
Two power supplies (one used for operations and one used for redundancy) (AC power supplies shown) with power supply slot 1 on the left and slot 2 on the right. |
|
② |
Four fan modules with fan slot 1 on the left and fan slot 4 on the right |
|
③ |
Management port (RJ-45 port) |
|
④ |
Chassis LEDs (Beacon [BCN] and Status [STS]) |
|
⑤ |
USB port |
|
⑥ |
Console port (RS232 port) |
|
⑦ |
Management port (SFP+ port) |
Table 2 shows the comparison.
|
Product Name |
N9K-C93180YC-FX |
N9K-C93108TC-FX |
N9K-C9348GC-FXP |
|
Ports |
48 x 1/10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports |
48 x 100M/1/10GBASE-T and 6 x 40/100-Gbps QSFP28 ports |
48 x 1-GBASE-T ports, 4 x 1/10/25-Gbps SFP28 ports and 2 x 40/100 QSFP28 ports |
|
CPU |
6 cores |
4 cores |
4 cores |
|
System memory |
Up to 32 GB |
24 GB |
24 GB |
|
SSD drive |
128 GB |
128 GB |
128 GB |
|
System buffer |
40 MB |
40 MB |
40 MB |
|
USB ports |
1 |
1 |
1 |
|
RS-232 serial ports |
1 |
1 |
1 |
N9K-C93180YC-FX Specification |
|
|
Hardware performance and scalability |
|
|
Ports |
48 x 1/10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports |
|
Downlink supported speeds |
1/10/25-Gbps Ethernet 16/32-Gbps Fibre Channel |
|
CPU |
6 cores |
|
System memory |
Up to 32 GB |
|
SSD drive |
128 GB |
|
System buffer |
40 MB |
|
Management ports |
1 RJ-45 port L1 and L2 ports are unused |
|
USB ports |
1 |
|
RS-232 serial ports |
1 |
|
Power supplies (up to 2) |
500W AC, 930W DC, or 1200W HVAC/HVDC |
|
Typical power (AC/DC) |
260W |
|
Maximum power (AC/DC)* |
425W |
|
Input voltage (AC) |
100 to 240V |
|
Input voltage |
200 to 277V |
|
Input voltage (DC) |
–48 to –60V |
|
Input voltage |
–240 to –380V |
|
Frequency (AC) |
50 to 60 Hz |
|
Fans |
4 |
|
Airflow |
Port-side intake and exhaust |
|
Physical dimensions |
1.72 x 17.3 x 22.5 in. |
|
Acoustics |
57 dBA at 40% fan speed, 68.9 dBA at 70% fan speed, and 77.4 dBA at 100% fan speed |
|
RoHS compliance |
Yes |
|
MTBF |
238,470 hours |
|
Environmental properties |
|
|
Operating temperature |
32 to 104°F (0 to 40°C) |
|
Nonoperating (storage) temperature |
–40 to 158°F (–40 to 70°C) |
|
Humidity |
5 to 95% (noncondensing) |
|
Altitude |
0 to 13,123 ft (0 to 4000m) |
