S5730-48C-PWR-SI-AC is a Huawei S5730-48C-PWR-SI Bundle, providing 24 x Ethernet 10/100/1,000 ports, 8 x 10 Gig SFP+, PoE+, with 1 interface slot, and 500W AC power supply. Huawei S5730-SI series switches are next-generation standard gigabit Layer 3 Ethernet switches that provide flexible full gigabit access and cost-effective fixed GE ports and 10 GE uplink ports, meanwhile can provide 40 GE uplink ports with an interface card. The S5730-SI was developed based on next-generation high-performing hardware and the Huawei Versatile Routing Platform (VRP). The S5730-SI supports simplified Operations and Maintenance (O&M), intelligent Stack (iStack), flexible Ethernet networking. It also provides enhanced Layer 3 features and mature IPv6 features. The S5730-SI can be used as an access or aggregation switch on a campus network or as an access switch in a data center.
Table 1 shows the quick spec.
|
SKU |
S5730-48C-PWR-SI-AC |
|
Ports |
24 x Ethernet 10/100/1,000 ports; 8 x 10 Gig SFP+ |
|
Slots |
One extended slot that supports an interface card: 4 x 40 GE QSFP+ interface card |
|
Power Supply |
One 500W AC power supply equipped by default |
|
Forwarding performance |
240 Mpps |
|
Switching capacity |
680 Gbit/s |
|
PoE |
Supported |
|
Dimensions (W x D x H) |
442 mm x 420 mm x 44.4 mm |
Table 2 shows the recommended optional accessories.
|
Model |
Description |
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module (850nm,0.5km, LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module (1310nm,10km, LC) |
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module (1310nm,40km, LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module (1550nm,40km, LC) |
|
S-SFP-GE-LH80-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module (1550nm,80km, LC) |
|
eSFP-GE-ZX100-SM1550 |
eSFP, GE, Single-mode Module (1550nm,100km, LC) |
|
SFP-1000BaseT |
1000BASE-T (RJ45) SFP Electrical Module, Auto Negotiate,100m |
|
SFP-10G-USR |
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module (850nm,0.1km, LC) |
|
OSXD22N00 |
Optical Transceiver, SFP+, 10G, Multi-mode Module (1310nm,0.22km, LC, LRM) |
|
OMXD30000 |
Huawei Optical Transceiver OMXD30000, SFP+,10G, Multi-mode Module (850nm,0.3km, LC) |
|
SFP-10G-iLR |
Optical Transceiver, SFP+,9.8G, Single-mode Module (1310nm,1.4km, LC) |
|
OSX010000 |
Optical Transceiver, SFP+,10G, Single-mode Module (1310nm,10km, LC) |
|
OSX040N01 |
SFP+, 10G, Single-mode Module (1550nm,40km, LC) |
|
SFP-10G-ER-1310 |
Optical Transceiver, SFP+,10G, Single-mode Module (1310nm,40km, LC) |
|
SFP-10G-CU3M |
Huawei SFP+,10G, High Speed Direct-attach Cables,3m, SFP+20M, CC2P0.254B(S), SFP+20M, Used indoor |
Table 3 shows the comparison.
|
Item |
S5730-48C-SI-AC |
S5730-48C-PWR-SI-AC |
S5730-68C-SI-AC |
S5730-68C-PWR-SI-AC |
S5730-68C-PWR-SI |
|
Fixed Ports |
24 x 10/100/1,000 Base-T, 8 x 10 Gig SFP+ |
24 x 10/100/1,000 Base-T, 8 x 10 Gig SFP+ |
48 x 10/100/1,000 Base-T, 4 x 10 Gig SFP+ |
48 x 10/100/1,000 Base-T, 4 x 10 Gig SFP+ |
48 x 10/100/1,000 Base-T, 4 x 10 Gig SFP+ |
|
MAC Address Table |
32K MAC |
32K MAC |
32K MAC |
32K MAC |
32K MAC |
|
Dimensions (W x D x H) |
442 mm x 420 mm x 44.4 mm |
442 mm x 420 mm x 44.4 mm |
442 mm x 420 mm x 44.4 mm |
442 mm x 420 mm x 44.4 mm |
442 mm x 420 mm x 44.4 mm |
|
Slot |
One extended slot that supports an interface card: 4 x 40 GE QSFP+ interface card |
One extended slot that supports an interface card: 4 x 40 GE QSFP+ interface card |
One extended slot that supports an interface card: 4 x 40 GE QSFP+ interface card |
One extended slot that supports an interface card: 4 x 40 GE QSFP+ interface card |
One extended slot that supports an interface card: 4 x 40 GE QSFP+ interface card |
S5730-48C-PWR-SI-AC Specification |
|
|
Ports |
24 x Ethernet 10/100/1,000 ports; 8 x 10 Gig SFP+ |
|
Slots |
One extended slot that supports an interface card: 4 x 40 GE QSFP+ interface card |
|
Power Supply |
One 500W AC power supply equipped by default |
|
Forwarding performance |
240 Mpps |
|
Switching capacity |
680 Gbit/s |
|
PoE |
Supported |
|
Memory (RAM) |
1 GB |
|
Flash |
512 MB in total. To view the available flash memory size, run the display version command. |
|
Mean time between failures (MTBF) |
46.8 years |
|
Mean time to repair (MTTR) |
2 hours |
|
Availability |
> 0.99999 |
|
Service port surge protection |
Common mode: ±7 kV |
|
Power supply surge protection |
Using 500 W AC power modules: ±6 kV in differential mode, ±6 kV in common mode Using 650 W DC power modules: ±2 kV in differential mode, ±4 kV in common mode |
|
Dimensions (W x D x H) |
442.0 mm x 420.0 mm x 44.4 mm (17.4 in. x 16.5 in. x 1.74 in.) |
|
Weight (including packaging materials) |
8.3 kg (18.3 lb) |
|
Stack ports |
Any 10GE SFP+ or 40GE QSFP+ ports Ports on the 2-port QSFP+ rear stack card |
|
RTC |
Supported |
|
RPS |
Not supported |
|
PoE |
Supported |
|
Rated voltage range |
100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC |
|
Maximum voltage range |
90 V AC to 264 V AC, 47 Hz to 63 Hz -38.4 V DC to -72 V DC |
|
Maximum power consumption (100% throughput, full speed of fans) |
Not providing the PoE function: 83.2 W (without card) 100% PoE loads: 967 W (system power consumption: 227.8 W, PoE: 739.2 W, without card) |
|
Typical power consumption (30% of traffic load) Tested according to ATIS standard EEE enabled No PoE power consumption |
44.2 W (without card) |
|
Operating temperature |
0°C to 45°C (32°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The operating temperature of the switch is 0°C to 40°C (32°F to 104°F) when it uses QSFP+ optical modules with 10 km or longer transmission distances. |
|
Short-term operating temperature |
-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The equipment can operate beyond the normal operating temperature range for a short-term period, but the following conditions must be met: The equipment operates at a temperature of over 45°C (113°F) consecutively for at most 96 hours in one year. The equipment operates at a temperature of over 45°C (113°F) for a total of no more than 360 hours in one year. The equipment operates at a temperature of over 45°C (113°F) for no more in 15 times in one year. The equipment may be damaged or experience unexpected exceptions if any of the preceding limits is exceeded. The equipment cannot start when the temperature is lower than 0°C (32°F). The maximum distance of optical modules used in these conditions cannot exceed 10 km. |
|
Storage temperature |
-40°C to +70°C (-40°F to +158°F) |
|
Noise under normal temperature (27°C, sound power) |
< 57.4 dB(A) |
|
Relative humidity |
5% to 95%, noncondensing |
|
Operating altitude |
0-5000 m (0-16404 ft.) |
|
Certification |
EMC certification Safety certification Manufacturing certification |
